M 42 - 420 MASSIVE Expert

All purpose blade for cutting all dimension of

solid steel.

 

Usage:

• common steel qualities up to 1400 N/mm2 tensile strength

• non ferrous metals

• cross sections up to approx. 100 mm (4")contour cutting operations

 

Characteristic:

•  tooth tips made of HSS M42 / material no. 1.3247

• standard teeth with 0° resp. slightly positive rake angle combined with a standard-raker or wavy set is distinguished to cut short chipping materials and light wall thickness for smooth and burr-free cuts

 

M 42 - 421 MASSIVE Expert Plus

Ideal for cutting larger solid bars

 

Usage:

• common steel qualities up to 1400 N/mm2 tensile strength
• non ferrous metals
• cross sections over 100 mm (4")

 

Characteristic:

• tooth tips made of HSS M42 / material no. 1.3247
• hook teeth with a positive rake angle combined with a raker-set, for easy tooth penetration and chip formation on larger cross sections
• cuts long chipping and tough materials without a problem
• cuts smooth and accurate

 

 

 

M 42 – 427 MASSIVE Master

excellent in cutting special alloys and materials difficult to machine (borazon-ground teeth)

 

Usage:

• stainless steels
• heat resistant steels
• heat resistant steels
• heat resistant steels

 

Characteristic:

• precision borazon-ground tooth tips made of HSS M 42 / material no. 1.3247
• hook teeth with ground triple chip geometry, positive rake angle and standard-raker-set for perfectly divided chips
• beveled roughing teeth provide excellent guidance of saw blade
• sharpest cutting edges grant fast cutting rates and great cutting accuracy

M 42 – 430 Expert

Basic - professional for thin and medium wall thickness

 

Usage:

• common steel qualities up to 1400 N/mm2 tensile strength

• profiles of non- ferrous metals
• single and bundle cuts
• tubes and structural with light or medium walls
• sheet metal on vertical band saw machines

 

Characteristic:

• tooth tops from material HSS M42, DIN 1.3247
• variable tooth with 0° rake angle with a special group-set cuts even lightest sections with less vibrations
• short chipping materials are cut without a problem
• long life and low cost cutting

M 42 – 431 Expert Plus

Strong in cutting medium and large sections

 

 

Usage:

• common steel qualities up to 1400 N/mm2

• non- ferrous metals
• single and bundle cuts
• solid material of medium to large dimensions
• heavy wall tubes

 

Characteristic:

• tooth tops from material HSS M42, DIN 1.3247
• variable teeth with a positive rake angle with a special group-set cut solid materials as well as heavy wall structural and tubing at fast cutting rates, with a smooth surface

 

 

 

M 42 – 434 MASSIVE Prominent

Excellent in cutting tough alloys and difficult materials

 

Usage:

• long chipping steels
• stainless steels
• Titanium base alloys
• special Bronze
• Copper alloys
• Nickel base alloys
• exotic, difficult to cut alloys
• solid materials of medium sections

 

Characteristic:

• tooth tops from material HSS M42, DIN 1.3247
• variable tooth with 0° rake angle with a special group-set cuts even lightest sections with less vibrations
• short chipping materials are cut without a problem
• band saw for long life and low cost cutting

M 42 – 436 ALU Master

Cutting Aluminum without pinching (wide setting)

 

Usage:

• wide setting
• materials that tend to pinching
• larger sections and heavy wall structural

 

Characteristic:

• tooth tops from material HSS M42, DIN 1.3247
• this heavy tooth set with positive rake angle avoids blade pinching and cuts larger workpieces with low vibration
• provides increased productivity and low cost per cut

 

 

 

M 51 – 531 EXPERT PLUS M 51

Extra durable teeth for cutting tough steel types and alloyed metals of medium dimensions

 

Usage:

• steels up to 1700 N/mm2 tensile strength
• authentic stainless steels
• nickle-based alloys
• Titanum and special bronzes
• solid material of medium dimensions
• heavy wall tubing

 

Characteristic:

• tooth tops from material HSS M51, DIN 1.3207
• positive variable tooth with special strong tooth forms
• high heat and wear resistance of HSS M51 tooth tips increases band life on all hard and problematic steels

 

M 51 – 537 MASSIVE M 51

Extremely resistant sharpened teeth for toughest steel types and alloys of medium dimensions (borazon ground teeth)

 

Usage:

• steels up to 1700 N/mm2 tensile strength
• authentic stainless steels
• nickle-based alloys
• solid material of medium dimensions

 

Characteristic:

• precision borazon ground tooth tips made of HSS M51, DIN 1.3207
• variable tooth with extremely positive rake angle in connection with the ground tooth geometry and a variable group-set generate a superior chip distribution
• champfered raker teeth grant excellent band guidance at lowest vibration
• Tooth tip hardness of approx. HRC 69 increases the life time for better cost-effectiveness